The AEB function is enabled by default and can be manually turned off; however, this setting only takes effect during the current ignition cycle and reverts to default upon the next power-up.

✓ Long-term Episode 61 · Question 2 2024-08-04

Is the Active Emergency Braking (AEB) function enabled by default, and can it be configured or turned off according to needs?

Official answer

The AEB function is enabled by default at the factory. Users can adjust the sensitivity of the Forward Collision Warning (FCW). Users can manually turn off the AEB; this setting only takes effect during the current ignition cycle and will be re-enabled by default after the next power-up.

Supplementary note

Additional context for the official answer

AEB Reset Mechanism Alert

Important note

Manually disabling AEB applies only to the current ignition cycle; it automatically re-enables after the vehicle sleeps or powers up again. This design prevents safety risks from forgetting to reactivate the system. Do not rely on temporary deactivation as a permanent setting, and verify the function status before each drive.

AI-assisted, for reference only

Driver Assistance Safety & Crash Protection All Q&As in Episode 61

PreviousIs the air conditioning cooling energy consumption high in summer? What are the recommended AC modes to use? NextWhy is my steering wheel memory position different when I get into the car next time?

Related Q&As

✓ Long-term Episode 56 2024-07-29

When Sentry Mode detects an event, can it only push a notification without flashing the lights?

Sentry Mode cannot only push notifications; it will automatically record and activate the hazard lights when an event occurs.

Safety & Crash ProtectionDriver Assistance

✓ Long-term Episode 54 2024-07-27

If installing a license plate frame blocks half of the front sensor, will it affect the assisted driving functions?

Blocking sensors with a license plate frame affects assisted driving safety; users are advised to check sensor status before use.

Driver AssistanceSafety & Crash Protection

✓ Long-term Episode 23 2024-04-20

When Sentry Mode detects someone approaching, the hazard lights flash immediately. Can I turn off the light warning and only record?

The hazard light warning triggered by Sentry Mode cannot be turned off currently; it aims to warn of danger and indicate that recording is in progress.

Driver AssistanceSafety & Crash Protection

✓ Long-term Episode 8 2024-04-05

For the Xiaomi SU7's active safety configuration, is there a significant difference in performance with or without LiDAR?

Currently, active safety performance is consistent with or without LiDAR; later upgrades will give LiDAR-equipped versions an advantage in obstacle avoidance.

Driver AssistanceSafety & Crash Protection SU7